Control Unit Part Number

Control Unit Part Number
OPERATION PROCEDURE
1. Touch "START (NISSAN BASED VHCL)" "RAS/HICAS" "ECU PART NUMBER".
^ If RAS/HICAS is not displayed, print the "SELECT SYSTEM" screen. Then refer to LAN-7, "Precautions When Using CONSULT-II". Precautions When Using CONSULT-II

NOTE: Just after starting engine, or turning ignition switch ON, it may not be displayed even if "START (NISSAN BASED VHCL)" is touched. In this case, reconnect CONSULT-II and CONSULT-II CONVERTER.

2. The part number described on RAS control unit sticker is displayed.