Active Test

Active Test
OPERATION PROCEDURE
1. Touch "START (NISSAN BASED VHCL)" "RAS/HICAS" "ACTIVE TEST".
^ If RAS/HICAS is not displayed, print the "SELECT SYSTEM" screen. Then refer to LAN-7, "Precautions When Using CONSULT-II". Precautions When Using CONSULT-II

NOTE: Just after starting engine, or turning ignition switch ON, it may not be displayed even if "START (NISSAN BASED VHCL)" is touched. In this case, reconnect CONSULT-II and CONSULT-II CONVERTER.

2. When turning the steering wheel right or left, the rear wheel turns in the same direction. If the steering wheel is not turned, the rear wheel turns left and right 5 times.