Disassembly and Assembly
Disassembly and AssemblyCOMPONENT:
DISASSEMBLY
1. Remove fixing screws of telescopic sensor, and then remove telescopic sensor from steering column assembly
2. Remove fixing screws of tilt sensor, and then remove tilt sensor from steering column assembly.
INSPECTION AFTER DISASSEMBLY
Check component parts for damage or other malfunctions. Replace if there are.
ASSEMBLY
Assembly is the reverse order of disassembly. For tightening torque, refer to "COMPONENT".
INSPECTION AFTER ASSEMBLY
Check tilt and telescopic mechanism operating range "L1", "L2" as shown in the figure.
Tilt operating range "L1: 37.5 mm (1.476 inch)
Telescopic operating range "L2": 40 mm (1.57 inch)