Work Support

WORK SUPPORT

Operation Procedure
1. Touch "BCM" on "SELECT TEST ITEM" screen.
2. Touch "WORK SUPPORT" on "SELECT DIAG MODE" screen.
3. Touch "RESET SETTING VALUE" on "SELECT WORK ITEM" screen.
4. Touch "START".
5. "RESET SETTING VALUE OK?" displayed, and touch "YES".
6. The setting will be changed and "COMPLETED" will be displayed.
7. Touch "END".

Work Support - Display Item List:

Display Item List

CAN DIAG SUPPORT MNTR
Refer to LAN-20, "CAN Diagnostic Support Monitor". Scan Tool Testing and Procedures