Service Notice or Precautions

Service Notice or Precautions
ATF COOLER SERVICE
If ATF contains frictional material (clutches, bands, etc.), or if an A/T is repaired, overhauled, or replaced, inspect and clean the A/T fluid cooler mounted in the radiator or replace the radiator. Flush cooler lines using cleaning solvent and compressed air after repair.

OBD-II SELF-DIAGNOSIS
^ A/T self-diagnosis is performed by the TCM in combination with the ECM. The results can be read through the blinking pattern of the A/T CHECK indicator or the malfunction indicator lamp (MIL). Refer to the table on "SELF-DIAGNOSTIC RESULT MODE" for the indicator used to display each self-diagnostic result. Self-Diagnostic Result Mode
^ The self-diagnostic results indicated by the MIL are automatically stored in both the ECM and TCM memories.
Always perform the procedure on "HOW TO ERASE DTC" to complete the repair and avoid unnecessary blinking of the MIL. General Notes

For details of OBD-II, refer to EC-54, "ON BOARD DIAGNOSTIC (OBD) SYSTEM" (for VQ35DE engine). Introduction
For details of OBD-II, refer to EC-763, "ON BOARD DIAGNOSTIC (OBD) SYSTEM" (for VK45DE engine). Introduction
^ Certain systems and components, especially those related to OBD, may use the new style slide-locking type harness connector.