Headlamp Alignment Sensor: Service and Repair
Removal and Installation of Height SensorREMOVAL
1. Disconnect height sensor connector.
2. Remove height sensor link bracket mounting nuts (1). (rear stabilizer side)
CAUTION: Never remove from the installation nut of height sensor link bracket (height sensor link side).
3. Remove bolts (2), and remove height sensor.
INSTALLATION
Installation is the reverse order of removal.
CAUTION: Tighten the bracket while pushing onto rear stabilizer when installing the installation nut of height sensor link bracket (stabilizer side).
NOTE: Adjust levelizer when replacing height sensor. For details, refer to "WORK SUPPORT (LEVELIZER ADJUSTMENT)".