Bench Seat

Removal and Installation

CAUTION: When removing and installing, use shop cloths to protect parts from damage.

BENCH SEAT

Removal
1. Remove seat cushion.




- Pull the lock lever at the front bottom of the seat cushion forward (1 for each side), and pull the seat cushion upward to release the wire from the seat cushion hook, then pull the seat cushion forward to remove.
- Remove the seat cushion from the vehicle.

2. Remove seat back.
- Remove the nuts under seatback.
- Lift up seatback assembly from underneath, and then remove seatback assembly from seatback hook that is fixed to the vehicle.
- Remove the headrest.
- Remove the seatback from the vehicle.

Installation
Install in the reverse order of removal. Be careful of the following one point.
- Securely engage the upper wire on the back side of seatback with seat hook.