Data Monitor

DATA MONITOR




When "DATA MONITOR" is selected, "ALL SIGNALS" and "SELECTION FROM MENU" are displayed.

ALL SIGNALS




- When "ALL SIGNALS" is selected and "START" is touched, the following vehicle signal condition that is input to AV (NAVI) control unit is displayed.
- For each signal, a comparison of actual operating status and the status recognized by the system can be checked.

Display Condition - Data Monitor:

Display Condition




SELECTION FROM MENU
When "SELECTION FROM MENU" is selected, the vehicle signal display can be selected. After that, the selected vehicle signal condition is displayed when "START" is touched.

AV COMM MONITOR
When "AV COMM MONITOR" is selected, "AV & NAVI C/U" and "AUDIO" are displayed.




AV & NAVI C/U
- When "AV&NAVI C/U" is selected, the communication condition from AV (NAVI) control unit to each unit and malfunction counter are displayed.







- Error counter displays OK if any malfunction is not detected in the past. If the malfunction is detected, it displays 0. When turning the ignition switch ON, if it is normal, it displays 1. The upper limit of the counter is 39.

AUDIO




- When "AUDIO" is selected, the communication condition from audio unit to each unit and malfunction counter are displayed.




- Error counter displays OK if any malfunction is not detected in the past. If the malfunction is detected, it displays 0. When turning the ignition switch ON, if it is normal, it displays 1. The upper limit of the counter is 39.




ECU PART NUMBER
The part number of AV (NAVI) control unit is displayed.