With Manufacturer's Scan Tool

1. Turn ignition switch "ON".




2. Connect "CONSULT-II and CONSULT-II CONVERTER" to the data link connector (1).
3. Turn ignition switch "ON".




4. Touch "START (NISSAN BASED VHCL)".




5. Touch "BCM".
If "BCM" is not indicated, go to Refer to GI-41, "CONSULT-II Date Link Connector (DLC) Circuit". Schematic




6. Touch "RETAINED PWR".




7. Select diagnosis mode. "ACTIVE TEST", "WORK SUPPORT" and "DATA MONITOR" are available.