Tail Lamp: Service and Repair

REAR COMBINATION LAMP

Removal and Installation

REMOVAL

Rear Fender Side
1. Remove trunk side finisher.
2. Disconnect rear combination lamp connector.

Image Symbols:

3. Remove rear combination lamp mounting nuts (A).
4. Pull the rear combination lamp (2) toward rear of the vehicle and remove from the vehicle.
5. Remove seal packing (1) from the vehicle.

Torque: N-m (kg-m, in-lb)
X: Always replace after every disassembly

INSTALLATION
Installation is the reverse order of removal.

CAUTION: Seal packing cannot be reused.