Parts 5 and 6
Part 5: Check ICC operation1. Start the engine and make sure it runs properly and that there are NO warning lights illuminated in the instrument panel.
2. Push the ICC main switch.
3. Make sure:
^ The indicator on the combination meter is illuminated as shown in Figure 39.
^ CRUISE is illuminated green No malfunctions displayed for 1 minute.
4. Continue with Part 6 below.
Part 6: Re-program the 8 MB (orange) Reprogramming Card back to its original format so it can be used for standard ECU reprogramming. Use ID Code 050602 to do this.
1. Remove the red/white diagnostic card from CONSULT-II and insert the Y50 Reprogramming Card (8 MB orange card).
2. Go to the ASIST terminal.
3. Use ID Code 050602 to download (transfer) data from ASIST to CONSULT-II.
^ This will re-program the 8 MB (orange) card to its original format so it can be used for standard ECU reprogramming.
^ Refer to Part 3 of this bulletin for the downloading procedure.