Data Monitor
Data MonitorOPERATION PROCEDURE
1. Touch START (NISSAN BASED VHCL), ABS, DATA MONITOR in order on CONSULT-II screen.
CAUTION: When START (NISSAN BASED VHCL) is touched immediately after starting engine or turning on the ignition switch, ABS might not be displayed in the system selection screen. In this case, repeat the operation from step 1.
2. At the monitor item selection screen, touch one of the items ECU INPUT SIGNALS, MAIN SIGNALS or SELECTION FROM MENU.
3. Touch START to proceed to the data monitor screen.
DISPLAY ITEM LIST
CAUTION: The display shows the control unit calculation data, so a normal value might be displayed even in the event the output circuit (harness) is open or short - circuited.
DISPLAY ITEM LIST:
DISPLAY ITEM LIST:
DISPLAY ITEM LIST:
DISPLAY ITEM LIST:
