Engine Cannot Be Started In "P" or "N" Position

Engine Cannot Be Started in P or N Position

SYMPTOM:
^ Engine cannot be started with selector lever in P or N position.
^ Engine can be started with selector lever in D or R position.

DIAGNOSTIC PROCEDURE
1. CHECK PNP SWITCH CIRCUIT
Perform self-diagnosis. Refer to AT-90, SELF-DIAGNOSTIC RESULT MODE. Self-Diagnostic Result Mode
Refer to AT-100, Diagnostic Procedure Without CONSULT-II. Displaying & Reading Trouble Codes
Do the self-diagnostic results indicate PNP switch?
YES >> Check the malfunctioning system.
NO >> GO TO 2.

2. CHECK CONTROL LINKAGE
Check the control linkage.
OK or NG
OK >> GO TO 3.
NG >> Adjust control linkage.

3. CHECK STARTING SYSTEM
Check starting system.
OK or NG
OK >> INSPECTION END
NG >> Repair or replace damaged parts.