Carpet: Service and Repair

FLOOR TRIM




Removal and Installation

REMOVAL
1. Remove front seat and rear seat cushions. Refer to "Removal and Installation" and "Removal and Installation".
2. Remove center console. Refer to "INSTRUMENT PANEL ASSEMBLY".
3. Remove instrument side panel (left and right). Refer to "INSTRUMENT PANEL ASSEMBLY".
4. Remove front and rear kicking plate.
5. Remove front and rear body side welt.
6. Remove center pillar lower garnish.
7. Remove dash side finisher.




8. Turn flat-bladed screw driver in counter-clockwise, and remove foot-rest from stud bolts on vehicle.
9. Remove foot-rest (left and right).
10. Remove carpet hook.




11. Remove floor carpet from carpet clip and remove floor carpet.

INSTALLATION
Install in the reverse order of removal.