High and Low Reverse Clutch

High and Low Reverse Clutch





DISASSEMBLY





1. Remove bearing race from high and low reverse clutch drum.





2. Using a flat-bladed screwdriver, remove snap ring from high and low reverse clutch drum.
3. Remove drive plates, driven plates and retaining plate from high and low reverse clutch drum.

INSPECTION
^ Check the following, and replace high and low reverse clutch assembly if necessary.

High and Low Reverse Clutch Snap Ring
^ Check for deformation, fatigue or damage.

High and Low Reverse Clutch Drive Plates
^ Check facing for burns, cracks or damage.

High and Low Reverse Clutch Retaining Plate and Driven Plates
^ Check facing for burns, cracks or damage.

ASSEMBLY





1. Install drive plates, driven plates and retaining plate in high and low reverse clutch drum.

CAUTION: Take care with order of plates.

^ Snap ring (1)
^ Retaining plate (2)
^ Drive plate (3)
^ Driven plate (4)
^ Drive plate/Driven plate: 4/4





2. Using a flat-bladed screwdriver, install snap ring in high and low reverse clutch drum.





3. Install bearing race to high and low reverse clutch drum.

CAUTION: Apply petroleum jelly to bearing race.