Direct Clutch

Direct Clutch








DISASSEMBLY





1. Using a flat-bladed screwdriver, remove snap ring from direct clutch drum.
2. Remove drive plates, driven plates, dish plate and retaining plates from direct clutch drum.
*: 2WD models

INSPECTION
^ Check the following, and replace direct clutch assembly if necessary.

Direct Clutch Snap Ring
^ Check for deformation, fatigue or damage.

Direct Clutch Drive Plates and Driven Plates
^ Check facing for burns, cracks or damage.

Direct Clutch Retaining Plates and Dish Plate*
^ Check facing for burns, cracks or damage.
2WD models

ASSEMBLY
1. Install drive plates, driven plates, dish plate^and retaining plates in direct clutch drum.

CAUTION: Take care with order of plates.

*: 2WD models





^ 2WD models
- Snap ring (1)
- Retaining plate (2)
- Drive plate (3)
- Driven plate (4)
- Dish plate (5)
- Drive plate/Driven plate: 5/4





^ AWD models
- Snap ring (1)
- Retaining plate (2)
- Drive plate (3)
- Driven plate (4)
- Drive plate/Driven plate: 5/5





2. Using a flat-bladed screwdriver, install snap ring in direct clutch drum.