Without Automatic Drive Positioner

Disassembly and Assembly








DISASSEMBLY
Remove all parts from jacket tube assembly.





^ When remove tilt lever, perform as shown in the figure.





^ When remove telescopic lever, perform as shown in the figure.

INSPECTION AFTER DISASSEMBLY
Check tilt and telescopic mechanism components for malfunction. Replace if there are.

ASSEMBLY
Assemble is the reverse order of the disassembly. For tightening torque, refer to PS-16, COMPONENT (WITHOUT AUTOMATIC DRIVE POSITIONER).

INSPECTION AFTER ASSEMBLY





Check tilt and telescopic mechanism operating range.