Hazard Warning Switch: Service and Repair

HAZARD SWITCH

Removal and Installation (M/T)

REMOVAL




1. Remove console boot (M/T). Refer to "INSTRUMENT PANEL ASSEMBLY" in "Instrument Panel".
2. Disconnect hazard switch connector.
3. Remove screws.
4. Remove hazard switch.

INSTALLATION
Installation is the reverse order of removal.

Removal and Installation (A/T)

REMOVAL




1. Remove console finisher (A/T). Refer to "INSTRUMENT PANEL ASSEMBLY" in "Instrument Panel".
2. Disconnect hazard switch connector.
3. Remove screws.
4. Remove hazard switch.

INSTALLATION
Installation is the reverse order of removal.