Turn Signal Bulb: Service and Repair

FRONT TURN SIGNAL/PARKING LAMP
1. Turn lighting switch OFF.
2. Remove fender protector (front).
3. Turn bulb socket counterclockwise and unlock it.
4. Remove bulb from its socket.
5. Installation is the reverse order of removal.

Headlamp (upper) low beam : 12 V - 35 W (D2R)
Headlamp (lower) high beam/Fog lamp : 12 V - 60/55 W (HB2)
Front turn signal/Parking lamp : 12 V - 21/5 W

CAUTION: After installing bulb, be sure to install plastic cap and bulb socket securely to insure watertightness.