Removal and Installation

COOLING FAN

Image Symbols:

Removal and Installation
REMOVAL
1. Drain engine coolant from radiator.

CAUTION:
^ Perform this step when engine is cold.
^ Do not spill engine coolant on drive belts.

2. Remove air duct (inlet) and air cleaner case.
3. Disconnect radiator hose (upper) at radiator side.





4. Disconnect fan motor harness connectors at the right-lower portion of fan shroud.
5. Remove radiator cooling fan assembly.

CAUTION: Be careful not to damage or scratch on radiator core.

INSTALLATION
Install in the reverse order of removal.

INSPECTION AFTER INSTALLATION
Make sure that fan motors operate normally.

NOTE: Cooling fans are controlled by ECM.