Front Door Lock

FRONT DOOR LOCK




Component Structure

Inspection and Adjustment
1. Remove the front door finisher. Refer to "Removal and Installation".
2. Remove the front door speaker. Refer to "Removal and Installation of Door Speaker".
3. Remove the front door window and front door module assembly. Refer to "Removal and Installation".

Removal and Installation

REMOVAL
1. Remove the front door finisher. Refer to "Removal and Installation".
2. Remove the front door speaker. Refer to "Removal and Installation of Door Speaker".
3. Remove the front door window and front door module assembly. Refer to "Removal and Installation".




4. Disconnect the inside handle cable and lock knob cable from the back side of the front door finisher.




5. Reach to separate the key lock rod and outside handle rod connection (on the handle).
6. Remove the mounting bolts (TORX T30), remove the door lock assembly.
7. Disconnect the door lock actuator connector.




8. Disconnect outside key antenna and front door request switch harness connector. (with Intelligent Key system)




9. Remove the outside handle mounting bolts, move the outside handle assembly backward, and then remove it from the pane- in front of the outside handle escutcheon.

INSTALLATION
Install in the reverse order of removal.

CAUTION: To install each rod, be sure to rotate the rod holder until a click is felt.