Vehicle Security (Theft Warning) System

CAUTION: CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunction might be detected in self-diagnosis depending on control units with carry out CAN communication.

1. Turn ignition switch OFF.




2. Connect CONSULT-II and CONSULT-II CONVERTER to data link connector.
3. Turn ignition switch ON.




4. Touch "START" (NISSAN BASED VHCL).




5. Touch "BCM".
If "BCM" is not indicated, go to GI-39, "CONSULT-II Data Link Connector (DLC) Circuit". Schematic




6. Touch "THEFT ALM".




7. Select diagnosis mode. "WORK SUPPORT", "DATA MONITOR" and "ACTIVE TEST"