Check Before Engine Is Started

Check Before Engine Is Started
1. CHECK A/T CHECK INDICATOR LAMP





1. Park vehicle on level surface.
2. Move selector lever to P position.
3. Turn ignition switch OFF and wait at least 10 seconds.
4. Turn ignition switch ON. (Do not start engine.)
Does A/T CHECK indicator lamp light up for about 2 seconds?
YES >> GO TO 2.
NO >> Stop the road test and A/T Check Indicator Lamp Does Not Come On.

2. CHECK A/T CHECK INDICATOR LAMP





Does A/T CHECK indicator lamp flash for about 8 seconds?
YES >> For TCM fail-safe mode, carry out self-diagnostic and record all NG items on DIAGNOSTIC WORK SHEET. Refer to SELF-DIAGNOSTIC RESULT MODE, Diagnostic Procedure With out CONSULT-II.
NO >>
1. Turn ignition switch OFF.
2. Carry out the self-diagnostic and record all NG items on DIAGNOSTIC WORKSHEET. Refer to SELF-DIAGNOSTIC RESULT MODE, Diagnostic Procedure Without CONSULT-II.
3. Check at Idle