Back Window Glass Moulding / Trim: Service and Repair

REAR WINDOW MOLDING

Exploded View EI-32:

Removal and Installation

REMOVAL
Remove rear window glass. Refer to "REAR WINDOW GLASS AND MOLDING".

NOTE: Apply a strip of protective tape along the contour of rear window glass (molding) to prevent paint surface from being damaged.

INSTALLATION
Refer to "REAR WINDOW GLASS AND MOLDING".

NOTE:
- Clean adhesive portion of rear window glass and around circumference with white gasoline.
- Apply dam rubber to upper and lower surfaces of glass.
- Attach rear window molding to side face of glass.
- Rear window molding should not overlap on the surface of rear window glass.