Assembly of Differential Case Assembly (R200 2-Pinion)

ASSEMBLY OF DIFFERENTIAL CASE ASSEMBLY (R200 2-PINION)





1. Install pinion mate shaft lock pin with a punch.
Make sure lock pin is flush with case.





2. Place differential case on ring gear.
3. Apply genuine medium strength locking sealant or equivalent to ring gear bolts, and install them.
^ Tighten bolts in a cries-cross fashion, lightly tapping bolt head with a hammer.





4. Press-fit side bearing inner cones on differential case with Tool. Tool number:
A KV38100300 (325523)
B ST33061000 (38107-2)