High and Low Reverse Clutch

High and Low Reverse Clutch





COMPONENTS

DISASSEMBLY





1. Using a flat-bladed screwdriver, remove snap ring from high and low reverse clutch drum.
2. Remove drive plates, driven plates and retaining plate from high and low reverse clutch drum.

INSPECTION
^ Check the following, and replace high and low reverse clutch assembly and mid sun gear assembly as a set if necessary.

High and Low Reverse Clutch Snap Ring
^ Check for deformation, fatigue or damage.

High and Low Reverse Clutch Drive Plates
^ Check facing for burns, cracks or damage.

High and Low Reverse Clutch Retaining Plates and Driven Plates
^ Check facing for burns, cracks or damage.

ASSEMBLY





1. Install drive plates, driven plates and retaining plate in high and low reverse clutch drum.
2. Using a flat-bladed screwdriver, install snap ring in high and low reverse clutch drum.