Diagnosis With Battery/Starting/Charging System Tester

Trouble Diagnosis with Battery/Starting/Charging System Tester

NOTE: To ensure a complete and thorough diagnosis, the battery, starter and alternator test segments must be done as a set from start to finish.

1. Turn off all loads on the vehicle electrical system.
2. Perform battery test with Battery/Starting/Charging system tester.Refer to "Trouble Diagnosis with Battery/Starting/ Charging System Tester".




3. Press "ENTER" to begin the starting system test.




4. Start the engine.
5. Diagnosis result is displayed on the tester. Refer to "DIAGNOSTIC RESULT ITEM CHART" .

NOTE:
- If the starter performs normally but the engine does not start perform engine diagnosis.




- For intermittent "NO CRANK" or "NO STARTER OPERATION" incidents, refer to "DIAGNOSTIC PROCEDURE 2".