Hazard Warning Switch: Service and Repair

HAZARD SWITCH

Removal and Installation (M/T)

REMOVAL
1. Remove console boot (M/T).
2. Remove connector.
3. Remove screws (5) and remove bracket from console boot (M/T).




4. Press pawl on reverse side and remove the hazard switch.

INSTALLATION
Install in the reverse order of removal.

Removal and Installation (A/T)

REMOVAL
1. Remove console finisher (A/T).
2. Remove connector.
3. Remove screws and remove ashtray assembly from console finisher (A/T).




4. Press pawl on reverse side and remove the hazard switch.

INSTALLATION
Install in the reverse order of removal.