Engine Cannot Be Started In "P" or "N" Position
Engine Cannot Be Started In "P" or "N" PositionSYMPTOM:
^ Engine cannot be started with selector lever in "P" or "N" position.
^ Engine can be started with selector lever in "D" or "R" position.
DIAGNOSTIC PROCEDURE
1. CHECK PNP SWITCH CIRCUIT
Execute self-diagnosis.
Do the self-diagnosis results indicate PNP switch?
YES >> Check the malfunctioning system. Refer to "DTC P0705 PARK/NEUTRAL POSITION SWITCH".
NO >> GO TO 2.
2. CHECK CONTROL LINKAGE
Check the control linkage.
^ Refer to "Checking of A/T Position".
OK or NG
OK >> GO TO 3.
NG >> Adjust control linkage. Refer to "Adjustment of A/T Position".
3. CHECK STARTING SYSTEM
Check starting system. Refer to "STARTING SYSTEM". Starting System
OK or NG
OK >> INSPECTION END
NG >> Repair or replace damaged parts.