Cannot Be Changed to Manual Mode

Cannot Be Changed to Manual Mode

SYMPTOM: Does not change to manual mode when manual shift gate is used.

DIAGNOSTIC PROCEDURE
1. MANUAL MODE SWITCH
Check the manual mode switch. Refer to "DTC P1815 MANUAL MODE SWITCH".
OK or NG
OK >> GO TO 2.
NG >> Repair or replace damaged parts.

2. CHECK SELF-DIAGNOSTIC RESULTS
Execute self-diagnosis.
Do the self-diagnostic results indicate turbine revolution sensor?
YES >> Check the malfunctioning system. Refer to "DTC P1716 TURBINE REVOLUTION SENSOR".
NO >> INSPECTION END