Vehicle Damage Warnings

CAN SYSTEM




Precautions For Trouble Diagnosis
- Do not apply voltage of 7.0 V or higher to the measurement terminals.
- Use the tester with its open terminal voltage being 7.0 V or less.
- Be sure to turn ignition switch off and disconnect negative battery terminal before checking the circuit.




Precautions For Harness Repair
- Solder the repaired parts, and wrap with tape. [Frays of twisted line must be within 110 mm (4.33 in)]
- Do not perform bypass wire connections for the repair parts. (The spliced wire will become separated and the characteristics of twisted line will be lost.)