14: "Steering Angle Sensor Has Not Been Corrected"
Inspection 14: When "STEERING ANGLE SENSOR HAS NOT BEEN CORRECTED" Appears on Self-Diagnostic Results DisplayInspection Procedure
1. CHECK SELF-DIAGNOSTIC RESULTS (1)
Check the self-diagnostic results.
Self-diagnostic results CONSULT-II display items Steering angle sensor has not been corrected.
Does anything besides "STEERING ANGLE SENSOR HAS NOT BEEN CORRECTED" appear on self-diagnostic results display?
YES >> Check and repair the indicated items. Then perform self-diagnosis again.
NO >> Adjust of steering angle sensor neutral position. Then GO TO 2.
2. CHECK SELF-DIAGNOSTIC RESULTS (2)
1. Turn ignition switch OFF and ON to erase self-diagnostic results, and perform VDC/TCS/ABS control unit self-diagnosis again.
Does anything appear on self-diagnostic results display?
YES >> Replace steering angle sensor. Then perform adjustment of neutral position and perform self-diagnosis again.
NO >> INSPECTION END