Reading and Clearing Diagnostic Trouble Codes

CONSULT-II Function

BASIC OPERATION PROCEDURE

CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carry out CAN communication.




1. Turn ignition switch "OFF".
2. Connect "CONSULT-II" and CONSULT-II CONVERTER to data link connector.




3. Turn ignition switch "ON".
4. Touch "START(NISSAN BASED VHCL)".




5. Touch "BCM".




6. Touch "TRUNK".




7. Select diagnosis mode.
"DATA MONITOR" and "ACTIVE TEST" are available