Vehicle Security (Theft Warning) System

CONSULT-II Inspection Procedure

CAUTION: CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunction might be detected in self-diagnosis depending on control units with carry out CAN communication.

1. Turn ignition switch OFF.




2. Connect CONSULT-II and CONSULT-II CONVERTER to data link connector.




3. Turn ignition switch ON.
4. Touch "START" (NISSAN BASED VHCL).




5. Touch "BCM".




6. Touch "THEFT ALM".




7. Select diagnosis mode.
"WORK SUPPORT", "DATA MONITOR" and "ACTIVE TEST"