Seals and Gaskets: Service and Repair

Replacing Oil Seal
DIFFERENTIAL OIL SEAL





1. Drain gear oil from transaxle.
2. Remove drive shafts.
3. Remove differential oil seal.





4. Install differential oil seal.
Apply multi-purpose grease to seal lip of oil seal before installing.
5. Install drive shafts.








- Install differential oil seal so that dimension "A" and "B" are within specifications.

STRIKING ROD OIL SEAL





1. Remove transaxle control rod from yoke.
2. Remove retaining pin of yoke.
- Be careful not to damage boot.





3. Remove striking rod oil seal.





4. Install striking rod oil seal.
- Apply multi-purpose grease to seal lip of oil seal before installing.