Removal and Installation

OIL PUMP ASSEMBLY:

REMOVAL
1. Remove drive belts.
2. Remove cylinder head.
Cylinder Head Assembly

3. Remove oil pans.
4. Remove oil strainer and baffle plate.
Oil Pan

5. Remove front cover assembly.

OIL PUMP ASSEMBLY:

INSTALLATION

NOTE: Always replace oil seal and O-ring with new ones.
When installing oil pump, apply engine oil to gears.
GBe sure that O-rings are properly fitted.






Use a scraper to remove old liquid gasket from mating surface of front cover.
Also remove traces of liquid gasket from mating surface of cylinder block.






1. Apply a continuous bead of liquid gasket to mating surface of front cover assembly.
Use Genuine RTV silicone sealant part No. 999MP-A7007 or equivalent.

2. Installation is in the reverse order of removal.