Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com

Without Scan Tool

HOW TO CHANGE SELF-DIAGNOSIS MODE WITHOUT CONSULT-II




From User Mode to Diagnosis Mode
Diagnosis mode activates only when a malfunction is detected, by pressing the driver's door switch at least 5 times within 7 seconds after turning the ignition "ON". SRS will not enter Diagnosis mode, if no malfunction is detected.

From Diagnosis Mode to User Mode
After a malfunction is repaired, switch the ignition "OFF" for at least one second, then back "ON". Diagnosis mode is returned to User mode. If switching Diagnosis mode to User mode is required while malfunction is being detected, switch the ignition "OFF", then back "ON" and press the driver's door switch at least 5 times within 7 seconds.