Trunk / Liftgate Weatherstrip: Locations

1 - Hood Front Sealing Rubber:

2 - 3 Cowl Top Seal And Cowl Top Grille:

4 - Front Windshield Molding:

5 - Sunroof Lid Weatherstrip:

6 - Body Side Welt:

7 - Front Hood Grille:

8 - Door Weatherstrip:

9 - Mudguard Center:

- With a vehicle coated with Hard Clear Coat, use double-faced 3M adhesive tape Product No.4210 or equivalent, after priming with 3M primer Product No. N-200 or C-100 or equivalent.

10 - Sash Cover Inner:

11 - Trunk Lid Weatherstrip:

12 - Door Outside Molding:

13 - Rear window molding.
Basically the same as front windshield molding.
Refer to (4) Front windshield molding.

14 - Side Guard Molding:

15 - Lower Moulding:

- With a vehicle coated with Hard Clear Coat, use double-faced 3M adhesive tape Product No.4210 or equivalent, after priming with 3M primer Product No. N-200 or C-100 or equivalent.

16 - Center Sash Molding:

17 - Door Sash Molding:

18 - License Plate Finisher:

19 - Rear Combination Lamp:

- Rear combination lamps are installed with nuts and butyl seal.

20 - Front Tower Bar:

CAUTION: Do not remove front tower bar assembly while vehicle is jacked up with wheels on.

21 - Rear Tower Bar:

CAUTION: Do not remove rear tower bar assembly while vehicle is lacked up with wheels on.

22 - Trunk Lid Finisher:

Part 9 Of 9: