Procedure 1 Checking SRS Operation

Checking SRS operation by using "AIR BAG" warning lamp - User mode




1. After turning ignition switch from "OFF" to "ON", "AIR BAG" warning lamp operates.




2. Compare "AIR BAG" warning lamp operation to the chart.

NOTE: If "AIR BAG" warning lamp operates differently from the operations shown above, refer to "AIR BAG" warning lamp operation - Diagnosis mode -, DIAGNOSTIC PROCEDURE 3 Procedure 3 Inspecting Malfunctioning Parts Using Warning Lamp (step 4).

Checking seat belt pre-tensioner operation by using "SEAT
BELT" warning lamp - User mode




1. After turning ignition switch from "OFF" to "ON", "SEAT BELT" warning lamp operates.




2. Compare "SEAT BELT" warning lamp operation to the chart.