With Generic Scan Tool

Generic Scan Tool (GST)




DESCRIPTION
Generic Scan Tool (OBDII scan tool) complying with SAE J1978 has 7 different functions explained . ISO9141 is used as the protocol.

GST INSPECTION PROCEDURE
1. Turn off ignition switch.




2. Connect "GST" to data link connector which is located under LH dash panel near the hood lock release handle.




3. Turn ON ignition switch.
4. Enter the program according to instruction on the screen or in the operation manual.
(*: Regarding GST screens, sample screens are shown.)




5. Perform each diagnostic mode according to each service procedure.
For further information, see the GST Operation Manual of the tool maker.




FUNCTION