Trouble Code Descriptions

IVMS (LAN)
Diagnostic Items Application / Description




DIAGNOSTIC ITEMS APPLICATION
For Diagnostic Item in each control system, read the CONSULT-II Operation Manual.




DIAGNOSTIC ITEMS DESCRIPTION


NOTE: When CONSULT-II diagnosis is operating, some systems under IVMS do not operate.


IVMS COMMUNICATION /
WITH SCAN TOOL




IVMS COMMUNICATION DIAGNOSES RESULTS LIST - 1

NOTE: When CONSULT-II indicates [PAST COMM FAIL] or [PAST NO RESPONSE], erase the memory and perform communication diagnoses again.
To erase the memory, perform the procedure below.
Erase the memory by CONSULT-II or turn the ignition to "OFF" position and remove 7.5 A fuse [No.14, located in the fuse block (J/B)].




IVMS COMMUNICATION DIAGNOSES RESULTS LIST - 2

NOTE: When CONSULT-II indicates [PAST COMM FAIL] or [PAST NO RESPONSE], erase the memory and perform communication diagnoses again.
To erase the memory, perform the procedure below.
Erase the memory by CONSULT-II or turn the ignition to "OFF" position and remove 7.5 A fuse [No. 14,located in the fuse block (J/B)].




IVMS COMMUNICATION DIAGNOSES RESULTS LIST - 3

NOTE: When CONSULT-II indicates [PAST COMM FAIL] or [PAST NO RESPONSE], erase the memory and perform communication diagnoses again.
To erase the memory, perform the procedure below.
Erase the memory by CONSULT-II or turn the ignition to "OFF" position and remove 7.5 A fuse [No. 14,located in the fuse block (J/B)].

WITHOUT SCAN TOOL




MALFUNCTION CODE TABLE