With CONSULT II Scan Tool

Reading Consult-II Screen Terms

IVMS SYSTEM (LAN)




1. Turn ignition switch "OFF".
2. Connect "CONSULT-II" to the data link connector.




3. Turn ignition switch "ON".
4. Touch "START".




5. Touch "IVMS".




6. Perform each diagnostic item according to the item application chart.
For further information, read the CONSULT-II Operation Manual.


IVMS COMMUNICATION



1. Touch "IVMS COMM DIAGNOSIS" in "IVMS-COMM CHECK".




2. Touch "START".




3. It no DTC is detected, inspection is end.




If any problem code is displayed, repair/replace the system according to the IVMS communication diagnosis results.

4. Erase the diagnostic results memory.
a. Turn ignition switch "ON".
b. Touch "IVMS".
c. Touch "IVMS COMM DIAGNOSIS" in "IVMS-COMM CHECK".
d. Touch "START" for "IVMS COMM DIAGNOSIS".
e. Touch "ERASE".