Wake-Up Diagnosis

WAKE-UP DIAGNOSIS




1. Touch "WAKE-UP DIAGNOSIS" in "IVMS-COMM CHECK".
2. Touch "START' for "WAKE-UP DIAGNOSIS".




3. After touching "START", turn ON switch designated on CONSULT-II display within 15 seconds.




4. If no DTC is detected, touch "NEXT" and perform wake-up diagnosis for next LCU or touch "END". (INSPECTION END)




If any problem is displayed, replace the LCU.




If "SW DATA UNMATCH" is displayed, touch "RETEST" and perform wake-up diagnosis again.