Front Seat

- When removing or installing the seat trim, carefully handle it to keep dirt out and avoid damage.
* For Wiring Diagram, refer to "POWER SEAT".


CAUTION:
- Before removing the front seat, turn the ignition switch off, disconnect both battery cables and wait at least 3 minutes.
- When checking the power seat circuit for continuity using a circuit tester, do not confuse its connector with the side air bag module connector. Such an error may cause the air bag to deploy.
- Do not drop, tilt, or bump the side air bag module installed in the seat. Always handle it with care.




POWER SEAT (WITH SIDE AIR BAG MODULE).