Memory Automatic Set

MEMORY AUTOMATIC SET
Two drive positions can be retained in the memory. Press memory switch to set driver's seat to preset position.




1. PROCEDURE FOR STORING MEMORY


NOTE:
1. When memory switch for which driver's seat positions are already retained in memory is pressed, new seat positions will be retained in memory in place of the previously set positions.
2. Drive position is erased from the memory when battery cable is disconnected. After connecting battery cable, perform initialization procedures.







2. SELECTING THE MEMORIZED POSITION


NOTES:
1. Do not keep cancel switch pressed as it will not operate.
2. Automatic exiting setting will be performed.
3. The driver's seat position and steering adjustment (see the following Table) operate simultaneously in the order of priority.




AUTOMATIC EXITING SETTING
For ease of entry and exit, move driver's seat to "exiting" position. "Exiting" positions:
Driver's seat ... Slides about 40 mm (1.57 in) rear from normal sitting position.




AUTOMATIC SET RETURN
With driver's seat set to the "exiting" position, operating one of the following procedures moves it to the position previously retained in memory.