Vehicle Immobilizer System

Reading Consult-II Screen Terms




1. Turn ignition switch OFF.
2. Connect "CONSULT-II" to Data link connector for CONSULT-II.




3. Insert IVIS (NATS) program card into CONSULT-II.
->: Program card
IVIS (NATS)
4. Turn ignition switch ON.
5. Touch "START'.




6. Perform each diagnostic test mode according to each service procedure.

For further information, see the CONSULT-II Operation Manual, IVIS / NVIS.





CONSULT-II DIAGNOSTIC TEST MODE FUNCTION




HOW TO READ SELF-DIAGNOSTIC RESULTS