Sleep / Wake Up Control
3 minutes after the ignition switch is turned OFF, the system goes into the SLEEP MODE to save battery powersupply. Communication with Communicator Response Center is not available in the SLEEP MODE.
To wake up the system, perform either of the following operations.
- Turn Ignition switch ON.
- Pull driver side outside door handle for more than 10 seconds. (Operation for door unlock function)
INDICATOR LAMPS OPERATION
The system status is displayed by the indicator lamps.
NOTE:
- When connection to Communicator Response Center by re-dial ends in failure, all the indicators are turned off.
- All indicators illuminate for up to 30 seconds or more when ignition switch is turned from OFF to ON and the system performs a self check.
- If both of MAYDAY and INFORMATION indicators do not turn off 30 seconds or more after the ignition switch is turned to ON, the system is malfunctioning.