Frontal Collision
FOR FRONTAL COLLISIONTo repair the SRS for a frontal collision, perform the following steps.
When SRS (except the side air bag) is activated in a collision:
1. Replace the diagnosis sensor unit.
2. Remove the air bag modules (except the side air bag module) and seat belt pre-tensioner assemblies.
3. Check the SRS components using the table shown here:
- Replace any SRS components showing visible signs of damage (dents, cracks, deformation).
4. Install new air bag modules (except the side air bag module) and seat belt pre-tensioner assemblies.
5. Conduct self-diagnosis using CONSULT, "AIR BAG" and "SEAT BELT" warning lamps. Refer to "Self-diagnosis" for details. Ensure entire SRS operates properly.
When SRS is not activated in a collision:
1. Check the SRS components using the table shown below:
Replace any SRS components showing visible signs of damage (dents, cracks, deformation).
2. Conduct self-diagnosis using CONSULT, "AIR BAG" and "SEAT BELT" warning lamps. Refer to "Self-diagnosis" for details. Ensure entire SRS operates properly.
SRS Inspection