CONSULT-II Inspection Procedure

1. Turn off ignition switch.




2. Connect "CONSULT" to data link connector for CONSULT. (Data link connector for CONSULT is located beside the hood lock release handle.)
3. Turn on ignition switch.




4. Touch "START".




5. Touch "ENGINE".







6. Perform each diagnostic test mode according to each service procedure.
For further information, see the CONSULT Operation Manual. This sample shows the display when using the UE990 program card. Screen differs according to the program card used.

ECCS Component Parts/Control Systems Chart:

ENGINE CONTROL COMPONENT PARTS/CONTROL SYSTEMS APPLICATION