With Infiniti CONSULT Hand-Held Tester

CONSULT APPLICATION TO ABS
ECU (ABS/TCS control unit) part number mode
Ignore the ECU part number displayed in the ECU PART NUMBER MODE. Refer to parts catalog to order the ECU.

CONSULT INSPECTION PROCEDURE FOR ABS/TCS

CONTROL UNIT





SELF-DIAGNOSIS PROCEDURE

NOTE: "SELF-DIAG RESULTS" screen shows the detected malfunction and the times of ignition switch ON and OFF after it occurred.








SELF-DIAGNOSTIC RESULTS MODE

- If the ABS warning lamp activates and Self-diagnosis could not detect any malfunctions, perform "DIAGNOSTIC PROCEDURE 3".





DATA MONITOR PROCEDURE


ACTIVE TEST PROCEDURE





- When conducting Active test, vehicle must be stationary.
- When ABS warning lamp stays on, never conduct Active test.





DATA MONITOR MODE





ACTIVE TEST MODE

NOTE: Active test will automatically stop ten seconds after the test starts. (EMERGENCY STOP monitor shows ON.)